3.0 To 3.4 Swap Exhaust Diy
3.0 To 3.4 Swap Exhaust Diy. Web doing a 3.4 swap on my 88 4runner with a 95 t100 motor, 97 harness, ecu, and automatic trans. A 2 body lift will allow ample clearance but you.
Web doing a 3.4 swap on my 88 4runner with a 95 t100 motor, 97 harness, ecu, and automatic trans. Web first of all, you will need a 3.4l with all the accessories that go with it. Ditto on the issue with it being a bit taller than the 3.0.
Web Will An 3.4 Directly Bolt Up To A 1990 4 Runner With The A340H Automatic Transmission Or Are Any Special Adaptors Needed.
I have two swapped rigs, one which is supercharged. It might bolt up, but electronically it's. 3.4 v6 engines exhaust dumps on the passenger side, 3.0 v6 engines exhaust dumps on the drivers side.
Web Check Out The 3.4 Swap Section On Yotatech, Tons Of Information Over There.
Web remember me not recommended on shared computers. Ignition components, smog stuff, etc.) second you will need. Web the 3.4 puts the intake on the other side and the battery will need to move to the opposite side.
A 2 Body Lift Will Allow Ample Clearance But You.
Ditto on the issue with it being a bit taller than the 3.0. Web first of all, you will need a 3.4l with all the accessories that go with it. Flex line adapter from ors (or custom made) body lift:
Post a Comment for "3.0 To 3.4 Swap Exhaust Diy"